3-12 Inch A-USP1 RWGV FLxFL

3-12 Inch A-USP1 RWGV FLxFL
Specifications:
- Sizes – 3", 4", 6", 8", 10", 12"
- Meets or exceeds all applicable requirements of ANSI/AWWA C515*** Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
- Flanged end drilling complies with ASME/ANSI B16.1 Class 125
- Iron body with nominal 10 mils Pro-Guard® Fusion Bonded Epoxy Coated interior and exterior surfaces
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
- Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
- Non-rising stem (NRS)
- Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
- 2" square wrench nut – open left or open right
- 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
- UL Listed, FM Approved: 350 psig (2400 kPa/24 barg)
- Designed for potable water applications
Options:*
- Position Indicators
- Stainless steel stem: Type 304, Type 316
- Low zinc, silicon bronze ASTM B98-C66100/H02 stem
- 2" square wrench nut
- P/N 10/16 Drilling
- EPDM Disc and O-rings
Resources:
- Operating Manual
- Product Specifications
- Suggested Specifications
- Installation Preparation Check List
- Submittal Drawing: (U7334)
- USPVH 350psi Resilient Wedge Gate Valve Brochure (Form 12954)
- Certification of Compliance: 3” - 12"
Dimension |
Nominal Size |
|||||
3" |
4" |
6" |
8" |
10" |
12" |
|
A |
12.38 |
14.19 |
18.00 |
21.50 |
25.50 |
28.62 |
E |
8.00 |
11.00 |
13.00 |
14.00 |
16.00 |
16.00 |
R |
7.50 |
9.00 |
11.00 |
13.50 |
16.00 |
19.00 |
FF |
8.00 |
9.00 |
10.50 |
11.50 |
13.00 |
14.00 |
Q (bore) |
3.30 |
4.30 |
6.30 |
8.30 |
10.30 |
12.30 |
UU (bolt circle diameter) |
6.00 |
7.50 |
9.50 |
11.75 |
14.25 |
17.00 |
B (number and size of holes) |
4--.75 |
8--.75 |
8--.88 |
8--.88 |
12--1.00 |
12--1.00 |
Turns to open |
11 |
14 |
20.5 |
26.5 |
33 |
38.5 |
Weight* |
73 |
81 |
136 |
213 |
326 |
440 |
Catalog Part No. |
Description |
Material |
Material Standard |
G-16 |
Bonnet Bolts & Nuts |
316 Stainless Steel |
ASTM F593 (bolt) ASTM F594 (nut) |
G-41 |
Stuffing Box Bolts & Nuts |
316 Stainless Steel |
ASTM F593 (bolt) ASTM F594 (nut) |
G-49 |
Stem O-rings (3) |
Nitrile |
ASTM D2000 |
G-200 |
Wrench Nut Cap Screw |
316 Stainless Steel |
ASTM F593 |
G-201 |
Stuffing Box O-ring |
Nitrile |
ASTM D2000 |
G-202 |
Wrench Nut |
Ductile Iron |
ASTM A536 ▼ |
G-203 |
Stem |
Bronze |
ASTM B138 |
G-204 |
Hand Wheel |
Cast Iron |
ASTM A126 CL.B |
G-205 |
Stem Nut |
Bronze |
ASTM B584 |
G-206 |
Guide Cap Bearings |
Acetal |
- |
G-207 |
Stuffing Box with dirt seal ++ |
Ductile Iron Nitrile▼▼ |
ASTM A536 ▼ ASTM D2000 |
G-208 |
Anti-friction Washers (2) |
Acetal |
- |
G-209 |
Wedge, Rubber Encapsulation |
Ductile Iron* SBR |
ASTM A536 ▼ ASTM D2000 |
G-210 |
Bonnet |
Ductile Iron |
ASTM A536 ▼ |
G-211 |
Bonnet O-ring +++ |
Nitrile |
ASTM D2000 |
G-212 |
Body |
Ductile Iron |
ASTM A536 ▼ |
+++ 3" valves use a bonnet gasket
* Fully encapsulated in molded rubber with no iron exposed
▼ Material strength ASTM A536 65-45 minimum
** Per ANSI/AWWA C111 working pressure above 250psi requires the use of a special gasket rated for higher pressure. ▼▼ 3" stuffing boxes are cast iron ASTM A126 class B+ *** 3" valves meet or exceed all applicable requirements of ANSI/AWWA C509 Standard