200 Series Pipe-Saver Pipe^® Repair Clamps

public://uploads/category/213_pipe_repair_clamp_bw_img.png

public://uploads/product/218_pipe_repair_clamp_bw_img.png

public://uploads/product/220_pipe_repair_clamp_bw_img.png

public://uploads/product/221_pipe_repair_clamp_bw_img_0.png

200 Series Pipe-Saver Pipe^® Repair Clamps

200 Series Pipe-Saver^® Repair Clamps- 1/2" through 24" standard steel pipe

The catalog number for a 220 Style Clamp, 3" long for 1-1/2" steel pipe is 220-3-190.

Full Line Catalog

Sizes & Operation

To specify the catalog number, use the charts to select the following information for the desired clamp:

Style number
Length
Size number

*Clamps available to fit specific size standard steel pipe within this nominal size range.

Clamp style number	Clamp length	Clamp size number
220	3	190

Clamp Style Number

Style number	Type of gasket	Gasket coverage	Bolts		Size available*
Style number	Type of gasket	Gasket coverage	Corrosion resistive plating	Stainless steel	Size available*
210	Smooth†	Full	X	-	1/2"-24"
211	Smooth†	Full	-	X	1/2"-24"
212	Gridded	Full	X	-	1/2"-24"
213	Gridded	Full	-	X	1/2"-24"
218	Smooth†	Regular	X	-	1-1/2"-24"
219	Smooth†	Regular	-	X	1-1/2"-24"
220	Gridded	Regular	X	-	1-1/2"-24"
221	Gridded	Regular	-	X	1-1/2"-24"

†Smooth gasket material is reinforced for 1-1/2" - 24" sizes

Clamp length and clamp style number

Standard steel pipe size††	Clamp size number	Standard steel pipe O.D.	Number of clamp sections
1/2"	0084	0.840	1
3/4"	0105	1.050
1"	0131	1.315
1-1/4"	0166	1.660
1-1/2"	0190	1.900
2"	0237	2.375
2-1/2"	0287	2.875
3"	0350	3.500
3-1/2"	0400	4.000
4"	0450	4.500
5"	0556	5.563
6"	0662	6.625
8"	0862	8.625
10"	1075	10.750	2
12"	1275	12.750
14"	1400	14.000
16"	1600	16.000
18"	1800	18.000
20"	2000	20.000
24"	2400	24.000

†† Nominal Sizes

Clamp lengths available	Number of bolts
3"	1
6"	2
9"	3
12"	4
18"	6

*IMPORTANT:PIPEREPAIR CLAMPS have demonstrated their capability to seal against water pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain is effected by the torque applied to the bolts, the uniformity of bolt tightening (when there is more than one bolt), as well as the type and extent of pipe damage, surface condition of the pipe,environmental conditions, and installation workmanship.